|
|
|
Remington M-700 Varmint Trigger Spring
This spring fits all Remington
M-7 and
M-700 including the X-Mark
PRO trigger, introduced in 2007.
This spring does not fit the
the new X-Mark PRO Adjustable trigger introduced
in 2009. The new X-Mark Pro Adjustable trigger
requires a different spring, listed separately.
Lighten
your rifle trigger pull. On average, installation of this spring will reduce your factory triggers weight of pull by
1½ to 2½ lbs. with no other changes. The exact amount of creep, overtravel and weight of pull
are dependant upon the type and amount of tuning accomplished by your gunsmith.
These triggers need special
attention to keep them clean. Use a cleaning rod guide to protect the trigger from barrel cleaning
solvents and oil. Do not spray aerosol lubricants directly into the trigger. Over time, many of these products
will get sticky and retard the free movement of the trigger and sear within the trigger housing. ESPECIALLY IN COLD
WEATHER.
Any rifle which may have an accumulation
of dirt and oil in the trigger housing should be cleaned by a gunsmith before any springs are changed or adjustments are made.
| New X-Mark Pro Adjustable |  | | The trigger assembly in
the foreground is the X-Mark Pro. The trigger assembly in the background which has the allen wrench inserted in the
trigger is the new X-Mark Pro Adjustable. |
IF YOU WANT A LIGHTER TRIGGER PULL, YOU NEED ALIGHTER TRIGGER SPRING!
No liability is expressed or implied for damage or injury which may result
from the improper installation or use of this product.
Item #009
|
|
