Tikka T-3, M-595 & M-695 Varmint Trigger Spring
Lighten your rifle trigger pull. On average, installation of this spring will
reduce your factory triggers weight of pull by 1½ to 2½ lbs. with no other changes. The exact
amount of creep, overtravel and weight of pull are dependant upon the type and amount of tuning accomplished by your gunsmith.
| Picture #1|
In order to gain access to this trigger spring, your gunsmith will first remove the large screw which attaches
the trigger assembly to the receiver.
In picture #1 identify the 3 small parts which have been removed from
the trigger assembly, from left to right, these parts are, the trigger spring plunger, the trigger spring, and the weight
of pull adjusting screw.
When replacing these parts into the trigger housing, care must be taken that the
trigger spring plunger faces in the same direction as when it was removed. The weight of pull screw is the only adjustment
available ( or necessary ). This trigger, and these springs work well with each other. Together, they provide a great
Picture #1 also shows the metric allen wrenches necessary to install and adjust this spring.
IF YOU WANT
A LIGHTER TRIGGER PULL, YOU NEED A LIGHTER TRIGGER SPRING!
No liability is expressed or implied for
damage or injury which may result from the improper installation or use of this product.